Whether it’s around home or a demanding commercial environment, exposed or sheltered conditions – we have outdoor umbrella bases to suit any environment.
30kg Concrete Filled Umbrella Base
$145 incl GST This is our standard commercial and residential umbrella base for our Venice umbrella range. It features a uniquely designed plastic shell that is filled with concrete, and has a powder coated steel spigot pipe. Good for use in areas with moderate exposure to the wind. Base size: 55cm diameter Post Size: 40mm
30kg Outdoor Umbrella Base
$195 incl GST This is our standard umbrella base for Venice umbrellas. The base is made with powder coated steel making it very strong and stable. Not recommended for coastal environments as it will cause rust over time. Base size: 55cm x 55cm. Post Size: 40mm
34kg Commercial Steel Outdoor Umbrella Base with Wheels
$245 incl GST This is our standard commercial umbrella base for larger umbrellas including our 3m square or 4.2m octagonal sizes. The base is made with powder coated steel making it very strong and stable. This base is suitable for smaller umbrellas with high exposure to the wind or larger umbrellas with low to medium exposure to the wind. It also includes two wheels making the umbrella easy to move. Not recommended for coastal environments as it will cause rust over time. Base size: 60cm x 60cm Post Size: 50mm (40mm adapter available)
Stainless Steel Wheels
$140 incl GST These stainless steel castor wheels are made to be fitted to any of our Shade7 steel bases. They are rust free, durable and are lockable.
Removable Spigot System
$260 incl GST Great for any outdoor area where you can bolt down to a concrete surface or wooden deck. It uses all stainless steel components making it ideal for coastal environments. Firstly the 185mm stainless steel base plate is fixed to the ground surface with bolts. The spigot can then be easily attached using the supplied spigot bolts, and then removed as required. The advantage of this system over a traditional base is that the Spigot and Base Plate System cannot blow over in the wind and there is no heavy base to move around or to take up space. Multiple base plates can be installed to provide a number of umbrella fixing locations for the Spigot. Ideal for larger umbrella sizes or windy locations. Post Size: 40mm or 50mm
Removable In-ground Fitting
$195 incl GST Great for all environments and enables an umbrella to be used without a base. The fitting is made up of two parts; 1: A galvanised ‘in-ground sleeve’ which has a stainless steel spring loaded lid. This needs to be concreted into the ground. 2: A removable ‘adapter tube’ which fits into the ‘in-ground sleeve’ and holds the umbrella securely. When the umbrella and removable adapter are removed, the lid will close producing a flush surface. No wasted space with bases and no heavy base to lift, the umbrellas cannot blow over and they look great. Ideal for windy locations. Post Size: 50mm
Umbrella Sand Anchor
$75 incl GST This high quality aluminium sand anchor is designed to securely hold your umbrella in soft sand. Simply use the removable handle to turn the spiral auger and it will dig its way into the sand. Then put your umbrella into the tube and install the stainless locking pin and your done! This sand anchor is made entirely with aluminium making it extremely strong, rust free and durable. Post Size: 40mm only
I purchased my Riviera Cantilever Umbrella in 2016 and I couldn't be happier. I live on the coast and needed something that was robust yet stylish. I use it most days and love it!